How to Print to Tray 3 on a HP Laserjet P2015 Printer

The HP Laserjet P2015 printer has the option to add an additional paper tray, referred to as "Tray 3." This tray may be used to double the capacity of paper that the printer can hold. It also may be used for printing special forms or paper that differs from the plain white letter stock in the main tray. For example, if you print a lot of documents on company letterhead, but you do not want to manually load letterhead into the printer each time, Tray 3 may be used specifically for this purpose.

If you just purchased the printer, remove it from the box and be sure to remove all of the inserts that were included to protect the internal moving parts during shipment. Apply power to the printer and install the toner cartridge. If this printer will be used as a network printer, connect it to your network at this time. Now install the software that accompanied the printer.

When setup has completed and you have been able to send a test print to the printer, it is time to install Tray 3. Load the preferred paper into Tray 3 and pick up the printer and set it onto the tray. There are posts on top of the tray that must be aligned so that the printer will sit on the tray.

On your computer, click the Windows "Start" button and then choose "Settings" and then "Printers." You should see the print driver for the "HP Laserjet P2015 series PCL 6" (or 5E.) Let's assume that you are using the PCL 6 for this example. Right-click the icon for this printer and then left-click "properties." Click on the "Device Settings" tab. Under the listing "Installable Options", there should be an entry for "Tray 3: Not Installed." Click on "Not Installed" and change it to "Installed" Now, under "Form To Tray Assignment", set Tray 3 to the type of paper that will be used (ex: letter.) Configure any other options, such as duplexing, as needed and then click the "OK" button.

Open the application from which you wish to print. Click the print button to send the job to the printer. On the "Print" window that opens, click the "Paper/Quality" tab. In the field that reads "Type new Quick Set name here", type the name of the type of paper in tray 2, (ex: white paper.) Set the size to "Letter", the source to "Tray 2", and the type to "Plain." Click the "Save" button and then do the same thing for Tray 3, but for the Quick Set name, choose a different name (ex: letterhead or packing slip.) Click "Save" again. When you send a job to the printer, all you have to do is choose the type of paper that you wish to print to and the Laserjet P2015 printer does the rest!


Related articles
How to Set a Networked Printer to Identify Which Computer a Printout Originated
How to Set the Time on a Comdial Impact Digital Phone System