How to Automate a Haunted House Using Sensors

You've built a creepy haunted house and it's the scariest one around. How do you take it to the next level? Automate it using non-contact infrared photoelectric sensors to control electronic scare devices.

Haunted houses are designed to be very creepy and with enough volunteers, they may be loaded with frights around every corner. What if there are not enough volunteers available to haunt the house? Infrared photoelectric sensors are the perfect device to detect guests and to trigger electronic gadgets, such as noise makers or motorized animatronic characters, giving visitors a scare they won't soon forget.

Sensors are used every day in various industries ranging from food processing to automotive assembly lines. Some of the top commercial haunted houses in the country are now using the very same sensors to automate their haunted attractions, providing a far creepier presentation. Industrial sensors are available to the general public for less money than you might expect, giving the average Joe an opportunity to built a haunted house that rivals even the ones presented by major theme parks.

The easiest type of photoelectric sensor to use in a haunted house attraction is one that uses a mechanical relay switch. This type of sensor is as easy to wire and operate as a light switch. Also be sure that the photoelectric sensors use infrared light and do not display a visible light which would draw attention to them. Arrange the photoelectric sensors across from each other in a hallway or door jamb, or anywhere that a guest will pass between them. The guest will break the infrared beam of light, causing the mechanical relay switch in the photoelectric controller to close, which will provide power to a noise maker or animatronic device. Each time a guest passes the sensors, the same action will occur repeatedly without operator intervention. This allows volunteers in the haunted house to spend time mingling with the guests and not hiding behind walls, just making noise.

Related articles
How to Host a Spooky Halloween Karaoke Party
How to Make Trick-or-Treaters Feel Welcome

How to Equip Amusement Rides with the Right Sensors

The best types of sensors in an amusement park are the ones you don’t think about until maintenance time. Find the most reliable products and they will save you money and headaches all year long.

Evaluate each amusement ride individually. What type of sensing solution is currently in place? How well does it work? If it is possible to replace contact switches, otherwise known as limit switches, with a non-contact solution, it will greatly improve the uptime for that ride. Contact switches with moving parts wear out quickly, whereas non-contact sensors only need to be replaced in the event that they are destroyed by collision, Mother Nature, or extremely rough handling. Consult with a manufacturer or distributor of industrial sensors and ask them for assistance with your application. Any sensor company who is interested in doing business with you should be able to support the products and answer your questions.

If a new sensor is what you desire, the next decision is which type of sensing technology to implement. There are many sensors to choose from, but in the amusement industry, the top picks are infrared photoelectric sensors and inductive proximity sensors. A transmitter photo eye projects an infrared beam of light, which is invisible to the naked human eye. A receiver photo eye reports when it sees the beam and when it doesn’t and will pass a signal to the appropriate controller. Rides that require objects to be detected from a distance or in harsh conditions, like log flume rides, river rapids, and dark, smoky theme rides are great places for photoelectric sensors.

Try an inductive proximity sensor in areas where metal objects must be detected at close range. These sensors will only detect metal and their sensing distance is limited, but they are extremely tough and can take a beating. Rides like roller coasters, where the sensor may be mounted on the track and detect the metal in the train are good applications for inductive proximity sensors. Inductive proximity sensors are excellent replacements for limit switches.

Develop a routine maintenance schedule and replace all sensors in the amusement park at least once a year. This will ensure proper function and will keep the rides operating at their peak performance. Visitors will appreciate the ride availability and you will notice improved uptime and fewer replacements throughout the year.

Supplier of Industrial Photoelectric Sensors

Related articles
How to Detect Boats in a Log Flume Ride
How to Troubleshoot Photoelectric Sensors

How to Detect Boats in a Log Flume Ride

It’s time for yearly maintenance and you need a reliable solution to replace the sensors in your log flume attraction. Try industrial infrared photoelectric sensors to keep your log flume running trouble-free year round.

Purchase an industrial infrared photoelectric system. Check the ratings on the photo eyes and be sure they have an IP67 rating or better. Also check their range to be sure it is more than adequate to cover the entire distance across the river. If the photo eyes need to operate underwater, choose the most powerful combination of transmitter and receiver available.

Mount the photo eyes in a through-beam configuration for the best performance. Do not rely on reflectors because they will cause problems as they get dirty. If the photo eyes will spend any length of time underwater, it is a good idea to purchase the hard-wired cable version instead of a quick-disconnect type. If you do use quick-disconnect sensors, be sure to squirt dielectric grease into the connectors before attaching them together. This will help keep the connections dry and the pins free from corrosion.

Ask the manufacturer or distributor of photoelectric sensors for a demo set to test in your ride application before you buy. Try several sets from different companies side-by-side to determine which ones work the best. Follow a strict maintenance schedule and replace the photo eyes at least once a year. Your visitors will appreciate the extended ride uptime that quality sensors provide.

Related articles
How to Troubleshoot Photoelectric Sensors
How to Equip Amusement Rides with the Right Sensors

How to Operate an Automatic Door Using Infrared Photoelectric Sensors

An automatic door is not complete without infrared photoelectric sensors to control it. Photo eyes provide a non-contact method to detect people or objects passing through the door and may be used in conjunction with a controller to open the door.

Choose a quality set of industrial infrared photoelectric sensors. It is imperative that sensors are used on an automatic door, not just to open the door, but to prevent the door from closing with a person or object underneath. Photoelectric sensors are ideal for this application because they do not require the door to make contact with the subject to detect their presence. Ultimately, the manufacturer should provide wiring diagrams and installation instructions to help interface sensors or other input devices with the door controller, but the following instructions should give you a general idea of how they should be used.

Mount the photoelectric sensors in a through-beam configuration. This will save you a lot of trouble later. Do not try to mount the photo eyes on one side and use a reflector on the other because you will find yourself constantly cleaning the reflector. Infrared photoelectric sensors provide a stronger and much more reliable beam when they are mounted across from each other. If the photoelectric system that you are using includes an external amplifier, compare the voltage ratings for the photoelectric system and the PLC. If they are a match, connect the output from the amplifier to the door's PLC input card.

Configure the photoelectric system to output all the time, but then take away that output when the photo eyes detect something. This is commonly listed by the manufacturer as a feature known as "Normally Closed", "Light Operate", or "Make Switching." Program the PLC to interpret an output from the photoelectric system as a "false" condition and the absence of that output as a "true" condition. When the PLC reads a "true" condition, it should open the door, and when the condition returns to "false" it should close the door. This does two things, it opens the door when an object is detected and also if the photoelectric system experiences a fault or loss of power.


Related articles
How to Test Whether a Sensor has a PNP or NPN Type Output Using a Multi meter
How to Troubleshoot Photoelectric Sensors

How to Troubleshoot Photoelectric Sensors

Applications for photoelectric sensors vary as do the design and function of the photoelectric sensors themselves, but there are certain things to look for if your set of photoelectric sensors has ceased to function.

Determine what types of photoelectric sensors are being used in the application. Is there a separate sender (transmitter) and receiver arranged in a through-beam configuration so that they are looking at one another? Is it a single photoelectric device using a reflector or bouncing a beam off the objects to be detected? Look for a part number and manufacturer name on the device. Try to find data sheets for the device on the company's website. Having the data sheets will reduce much of the guesswork involved in troubleshooting.

Determine the problem. Are the photo eyes registering an output with no object present? Are they ignoring objects that they should be detecting? Does the problem happen at a certain time of day? Are there environmental influences acting upon the photo eyes?  If the photo eyes register an output when no object is present, first check the face of the eyes to be sure they are clean. If they are dirty, use a soft cloth and a non-abrasive, non-corrosive cleaner to wipe them clean. If the photoelectric system incorporates a reflector, be sure to clean it thoroughly too. Test the photo eyes now to see if they work.

If problems persist, try aligning the photo eyes. Using a length of string or wire have one person hold the line beside one photo eye and take your end across to the other. Pull the line tight so that it passes in parallel beside each eye, forming a straight line. It should be obvious that the photo eyes are out-of-alignment if one eye is parallel to the string and the other is not. Adjust both photo eyes as close as you can. Once they are pretty straight, make fine tuning adjustments to the sender eye only. If the sender photo eye is projecting a beam off to the side, then adjusting the receiver photo eye is worthless. This "string method" can also be used with an eye / reflector combo.

If the photoelectric system still is not functioning, check the data sheets for the sensors to determine what supply voltage is necessary to operate the eyes. Set your multi meter to the correct setting AC or DC and verify that enough power is present to operate the photo eyes.  If the photo eyes use a visible beam, verify that you can see the beam coming from the sender. If the photo eyes use infrared light, it is possible to use a video camera equipped with the nighttime filming option (often referred to as "Night Shot") to see the beam projected from the infrared sender.  Is the receiver photo eye positioned in direct sunlight? The light from the sun can have adverse affects o photoelectric systems. It is OK to mount the sender (transmitter) in direct sunlight as long as the receiver is shielded from it.  Is the photoelectric system properly grounded? Be sure to use earth ground or at least a machine ground. Don't ground your photo eyes to a small screw or tiny DIN rail and think that will suffice.

If the photo eyes do not generate random signals, but instead ignore the objects that they are supposed to detect, then the problem is, more than likely, that the beam of light is not actually being broken. If there is a gain adjustment available on the photo eyes, adjust it to a lower setting. If this doesn't work, try positioning the photo eyes so that the object-to-be-detected passes closer to the receiver eye. If this is not possible, try narrowing the beam of light projected from the sender (transmitter) and/or narrow the field of view of the receiver. Both may be accomplished using a short, narrow piece of PVC pipe.

Check your splices. If the wires of the photo eyes have ever been spliced, check the splices and verify that they are clean. Don't just wrap them together and wind electric tape around the splice. Solder the connection and use a heat shrink tube to seal the connection.  If all else fails, try calling the manufacturer of the photoelectric sensors or a distributor of the products and ask for troubleshooting assistance.

Related Articles
How to Install and Maintain Photoeye Sensors for In-bay Automatic Car Washes
How to Detect Visitors in a Driveway Using Infrared Photoelectric Sensors